RE: [Harp-L] EV RE10

["Tim Moyer" <wmharps@xxxxxxxxxxxxxxxxxxxx>]

According to Carlos' own website, he runs his RE-10 into a Roland RE 
501 echo/effects unit, which has inputs of both high and low 
impedance, then runs that output into a '59 Bassman.  That's how he 
solves the impedance problem.

-tim

Tim Moyer
Working Man's Harps
http://www.workingmansharps.com/

--- In harp-l-archives@xxxxxxxxxxxxxxx, "Jordan, Jim" <JJordan@xxxx> 
wrote:
I'm using XLR mic cord attached to a Lo to Hi Z impedance 
transformer to
plug into an amp.


-----Original Message-----
From: adams, john [mailto:adams_john@xxxx] 
Sent: Thursday, February 03, 2005 2:35 PM
To: dfwhoot; Jordan, Jim; harp-l@xxxx
Subject: RE: [Harp-L] EV RE10


It uses a standard XLR mic cord. 

-----Original Message-----
From: harp-l-bounces@xxxx [mailto:harp-l-bounces@xxxx] On
Behalf Of dfwhoot
Sent: Thursday, February 03, 2005 2:14 PM
To: Jordan, Jim; harp-l@xxxx
Subject: RE: [Harp-L] EV RE10

What type of end piece does the RE 10 require ? Jerl

-----Original Message-----
From: harp-l-bounces@xxxx [mailto:harp-l-bounces@xxxx]On
Behalf Of Jordan, Jim
Sent: Wednesday, February 02, 2005 12:47 PM
To: harp-l@xxxx
Subject: [Harp-L] EV RE10


Since both Carlos Del Junco and Jason Ricci and Chris Michalek have 
been
using the RE10, I couldn't resist buying one.  I must say, it has a 
nice
compressed tone for a vocal style mic.  It was also smaller than I
imagined. Is the RE10 the new harp mic favorite? Sorry if I excluded 
any
pros out there that have been using this mic. Jim
_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org Harp-L@xxxx
http://harp-l.org/mailman/listinfo/harp-l


_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org Harp-L@xxxx
http://harp-l.org/mailman/listinfo/harp-l

_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org
Harp-L@xxxx
http://harp-l.org/mailman/listinfo/harp-l
--- End forwarded message ---