Re: Fw: [Harp-L] my valve setup

["Dave Staley" <staleyclan@xxxxxxxxxxx>]

Microfiber seems flimsy to be used on its own. Do you use microfiber as a
single or double valve? If double, what do you use as support material?

  _____  

 

I pay no attention whatsoever to it...I'm sure Pat Missin will blanche white
when he reads this...I notice no difference, if there is one.

PT
----- Original Message ----- From: "Howard Chandler"
<chandler@xxxxxxxxxxxxxxx>
To: "PT Gazell" <pt@xxxxxxxxxxxx>
Cc: <harptalk@xxxxxxxxxxxxxxx>; "harp-l" <harp-l@xxxxxxxxxx>
Sent: Tuesday, August 23, 2005 5:32 PM
Subject: Re: Fw: [Harp-L] my valve setup



Do you cut it so it stretches the width or length of the valve?

Thanks,

Howard

PT Gazell wrote:

I don't know how to measure that. But I can tell you that it's about twice
as thick as a plastic windsaver. The color makes no difference. Asking for
ultrasuede will be your best bet in a fabric store. Also ask if they have a
scrape box with this material. I bought a 4in wide by 1 yard piece for about
$1.00. It will make a lot of valves. The material also will have give or
stretch in one direction only.

PT Gazell