[Harp-L] Re: MC151 problem

["Joe Spiers" <moparjoe@xxxxxxxxxxx>]

I have taken apart and repaired the MC151 cartridge. It could very easily
be a bad internal connection giving you erratic meter readings. This
connection is inside the cartridge itself, not the ones you can see inside
the shell. The way the parts inside are assembled makes this connection very
delicate, and easily disturbed by general handling, especially dropping. If
it's not working well you can send it to me for a free inspection. If I can
fix it, the cost is 40 dollars. If I can't, then all you've lost is a bad
element and a couple bucks postage.

Regards,
Joe Spiers


----- Original Message ----- 
From: "Attila Czigány" <atteeharp@xxxxxxxxx>
To: <harp-l@xxxxxxxxxx>
Sent: Tuesday, August 09, 2005 12:18 PM
Subject: [Harp-L] MC151 problem


> Hi!
> Is it normal that the resistance of the Astatic MC151 cartridge can be
> measured, it is 500K, sometimes 300K or sometimes 1,5M.
> I dont know if it is my fiction or really, but it should give bigger
signal.
> Any idea?
> Thanks in advance,
> Attee
>
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org
> Harp-L@xxxxxxxxxx
> http://harp-l.org/mailman/listinfo/harp-l
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.338 / Virus Database: 267.10.2/65 - Release Date: 8/7/05
>
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.5/67 - Release Date: 8/9/05