Re: [Harp-L] Multi-amp rigs




----- Original Message ----- From: <Marion.Spiers@xxxxxxxxxxxx>
To: <harp-l@xxxxxxxxxx>
Sent: Thursday, October 28, 2004 3:06 PM
Subject: [Harp-L] Multi-amp rigs



Say you're running 2 Bassmans at once, can you just run a cable from the
unused input on the channel you use to the other amp, or is there more to
it?
Thanks
kcmojo

Hi,
In most of the Fender tube amps, especially the Bassman. the easiest way to do it is from the channel that you're plugged into, let's say it's input #1 in the normal channel, get another guitar cable and place it into channel 2 of the amp your mike is plugged into, and at the other end of the cable, plug it into the #1 input of the channel the mike was plugged into in the first amp, only this cable is in the 2nd amp, and you can keep repeating this process to do 3 or even 4 different amps. Sam Myers does this as did Kim Wilson in the late 70's and early 80's with the T-Birds, but into 3 REAL '59 Bassmans.


Sincerely,
Barbeque Bob Maglinte
Boston, MA
http://www.barbequebob.com
MP3's: http://music.mp3lizard.com/barbequebob/






This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.