Re: How to make CD's from a Sony mini-disc recorder



In a message dated 5/9/04 12:03:29 PM, dr.alters-wizardsway@xxxxxxx writes:


 > I have an older model Sony minidisc model MZ-R37. I have been recording 
our
 > bands rehearsals and gigs.  I can't get it to download so that I can burn
 > CD's for the guys. . . . Does anyone have any advice?
 >
    I have a Sony MZ-R70 minidisc...It records great but, same problem.. I
can't get it to download into my Macintosh computer. I have an IMic, Itunes,
Toast and all that stuff, but still can't make it work. It will download for 
a few
seconds, sometimes as long as 30 seconds, then stop. An alert says the disk
is responding too slowly....    Any advice here also???

Steve "Moandabluz" Webb
still a fool for the harp

I have the same recorder as Steve, and I've made a lot of CDs of our 
sessions from the recordings.  I have a PC and know nothing about Macs etc.  
Maybe you should close other programs down/disconnect from the internet 
while you're copying (that's the blind leading the blind there!).  All I can 
do is tell you what I do, so here goes!

I have a Soundblaster Audigy card, with a panel on the front of the 
computer, but have found it impossible to connect successfully this way.  
Instead I connect the headphone socket of the MD to the MIC socket at the 
back.  I use software called Audio Cleaning Lab Deluxe (cost me £25), which 
allows me to copy the recording on to the hard-drive and then edit it via a 
wave form very easily (deleting passages, fading in/out, cutting out the 
swear-words, making separate tracks, enhancing the sound etc.)  I adjust the 
input sound level by turning up the MIC setting on the computer to full and 
controlling the sound input using the MD volume control (find the loudest 
passage of music to do this so that your recording isn't over-modulated - 
otherwise you get ugly digital "clipping" of loud sounds).  Then just play 
the MD with "record" running on the computer.  You can edit the recording 
afterwards and get it to CD length, then use the software to burn it on to a 
CD.

It's only one way, but it's simple and it works for me every time.  The same 
software can be used to copy vinyl and cassettes to CD and can be used to 
remove hiss and clicks.  You can even correct the pitch if your 
record/cassette deck runs at the wrong speed - ideal for making recordings 
to play along with.  I'm certain there's other similar software around, 
maybe cheaper or free.

Steve Shaw (computer novice).

Want more than the blues?  Try Irish!
http://mysite.freeserve.com/trad_irish_harmonica

_________________________________________________________________
Stay in touch with absent friends - get MSN Messenger 
http://www.msn.co.uk/messenger





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.