Re: Tuna Tin-WAS Coffee Cup

["Mike and Beverly Rogers" <mbrogers@xxxxxxxxxxxxxxxxxxxxxx>]

Cute idea.  Just goes to show that you can tuna harp, but you can't tune
fish.  Bullfrog
- ----- Original Message ----- 
From: "Wm.Galley" <mil-bil@xxxxxxx>
To: "HARP-L" <harp-l@xxxxxxxxxx>
Cc: "HarpTalk" <harptalk@xxxxxxxxxxxxxxx>
Sent: Saturday, March 27, 2004 10:11 PM
Subject: Tuna Tin-WAS Coffee Cup


>
>
>         Hi Harpers,
>         The 'coffee cup' thread has prompted me to tell of my use of a
> "Tiny Tuna Tin"
>         It is the 6 oz. size, 3 1/4 " across, 1& 1/2" high. ( Some salmon
> tins are the same.)
>         When top edge is 'squashed' together, it comes to the point where
> your 10 holer will just be grabbed by the edges.
>
>         I drilled eight,  5/16" holes in the bottom, around the edge; you
> could use different mumbers and/or sized holes to suit yourself.
>         When about to play, you say you are going to play a Tiny Tuna Tin,
> (the harp is hard to see ! )  At the end you could say 'hey, there's a
tiny
> 10 hole harp in here !'
>         Cupping is easier than you would think, but projection  seems less
> than without.   Next, I think I'll try velcro-ing a little 'lavalier' mic
> inside the tin;   If anyone trys this I'd like how well the little mics
work
> .  bg
>
>
> --
> Harp-l is sponsored by SPAH, http://www.spah.org
> Hosted by ValuePricehosting.com, http://www.valuepricehosting.com
>
>
>