Re: SBS Marine Band question
- Subject: Re: SBS Marine Band question
- From: Russ Bradley <wbradley@xxxxxxxxxx>
- Date: Fri, 11 Jun 2004 06:35:34 -0400
Adding to this, I find the SBS to be the most responsive production harp
around. I use a much lighter touch with an SBS than I do, say, a
Special 20 or stock 10 hole Marine Band.
Russ
Bob Maglinte wrote:
>----- Original Message -----
>From: "Grant Kester" <gkester@xxxxxxxx>
>To: <harp-l@xxxxxxxxxx>
>Sent: Thursday, June 10, 2004 2:38 PM
>Subject: SBS Marine Band question
>
>
>
>
>>Dear List,
>>
>>I have a C Steve Baker Marine Band and the lowest draw note
>>consistently vibrates against the metal cover, making a plinking sound.
>>Does anyone have any good fixes for this problem? The reed is gapped
>>correctly and I'm reluctant to reduce the gap further. If it was a
>>normal sized Marine Band I could try a Turbolid, but it's an SBS so
>>it's extra long.
>>
>>Thanks,
>>Grant Kester
>>
>>
>
>Hi Grant,
>The most likely culprit is that you're playing it way too hard from the get
>go, and this is pretty common with lower pitched reeds as a rule unless the
>covers are larger, like a chromatic.
>
>Sincerely,
>Barbeque Bob Maglinte
>Boston, MA
>http://www.barbequebob.com
>MP3's: http://music.mp3lizard.com/barbequebob/
>
>
>--
>Harp-l is sponsored by SPAH, http://www.spah.org
>Hosted by ValuePricehosting.com, http://www.valuepricehosting.com
>
>
>
>
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.