Re: Fender Champ



Oh - and VERY IMPORTANT - don't use a modern 6V6.  You *must* use *only* NOS
(new old stock) 6V6's in the Champ.  The new ones are WAY too wimpy and will
arc when you drive the amp hard.

 -- mike

From: <Markburness@xxxxxxx>
> Make sure the speaker is the correct 4ohm replacement (will probably
measure
> 3.2ohmsDC with a VOM), maybe try some fresh tubes (6V6 & 12AX), a Champ is
> pretty harp friendly right off the bat.





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.