Re: Need help w/ a Harp Mic...



You can find some of the Vintage adapters at www.dirtydansmics.com 

- ----- Original Message ----- 
From: "Scorcher" <s_c_o_r_c_h_e_r@xxxxxxx>
To: "! [HARP-L]" <harp-l@xxxxxxxxxx>
Sent: Tuesday, December 16, 2003 5:31 PM
Subject: Need help w/ a Harp Mic...


> 
> I recently acquired a DN-50 mic.
> 
> http://members.cox.net/~s_c_o_r_c_h_e_r/dn50.html
> 
> This is an old, deco-style, dynamic mic - very nice looking, kinda
> long, but not too big around to cup. There's a 3-pin swivel connector
> on the bottom with a threaded collar, intended to go into the top of a
> mic base. The three pins form an equilateral triangle.
> 
> I'm looking for a clean way to leave this old connector on the mic &
> adapt it for a guitar-style cord (1/4 plug). Am I dreaming?
> 
> Barring that, I can gring & fill it, but I'd rather leave it as
> "Stock" looking as possible.
> 
> Any suggestions are welcome.
> -Scorcher
> 
> --
> Harp-l is sponsored by SPAH, http://www.spah.org
> Hosted by ValuePricehosting.com, http://www.valuepricehosting.com
> 





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.