Re: To use an octave device?
- Subject: Re: To use an octave device?
- From: Richard Hunter <turtlehill@xxxxxxxxxxxxx>
- Date: Tue, 24 Dec 2002 18:42:46 -0500
Chris Hammond wrote:
"I seem to have quite a bit of problem with the
OC-2 basically dropping out completely on a bend or on a low note. If I
stick to holes 3 and above it seems to track quite well. I get a nasty
cracking sound that occurs just as the note drops out. Not sure what is
causing this."
In my experience, the likeliest cause of these symptoms is a worn-out
battery. Try replacing the 9-volt battery in the unit or switching to a
wall-wart power supply. Otherwise, it's pretty unusual for this device
not to track low notes.
If the battery switch doesn't do the job, I suggest that you try running
a different instrument, say a guitar or keyboard, or even a different
mic into the unit to see whether the problem is in the OC-2, or in the
mic feeding it.
Regards, Richard Hunter
http://www.hunterharp.com
Turtle Hill Productions
turtlehill@xxxxxxxxxxxxx
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.