Re: Misc. 64x, Pete

>Thanks for the detailed info on polishing. I'll give it a try.
No sweat Jack, jus take it easy on the polishing wheel, because if you put 
too much pressure, it may throw the slide piece around and bend the heck out 
of it. I would feel really bad if this happened after I had suggested it. 
YOu may want to try polishing your penknife blade at first on it to get the 
hang of the tool. (Assuming you will be on a fast grinder).
Good Luck
                          Christian Laferriere
                           Gatineau, Quebec

This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.