Re: [Harp-L] On Stage Harp Holder/tray solution




Dan wrote:
 "Tim, check out the O-ring mike stand accessory holder. Musician's Friend has them." 

I have the O-Tray myself. I've used it for several years now with great success. I like it a lot. The only trouble with it is that the mic stand shaft you use it on has to be a very specific diameter of 7/8". But I've seen stand shafts that claim to be 7/8", but they're just not quite thick enough for the tray to clamp onto. My band has only two mic stands that my tray will work with. All the rest are too thin. And it's only seldom that I run across stands provided by a sound tech that the tray will work with either,

 
                          Hawkeye Kane 
                                                                                                 hawkeyekane@xxxxxxxxx 
                                                                                                     Cell: (217)-741-7183 
                                                                                                    http://www.hawkeyekane.com/ 


On Monday, September 1, 2014 1:46 PM, Dan Axt <dapperdan@xxxxxxxxxxxxxx> wrote:
  


Tim, check out the O-ring mike stand accessory holder. Musician's Friend 
has them.  Dan Axt
On 8/31/2014 3:05 PM, Tim Gartland wrote:
> I am looking for input of finding a lightweight, |attachable to a mic stand tray for my harps/set list/phone etc. Thanks! Tim
>
> Tim Gartland
> tim@xxxxxxxxxxxxxxx
> 781-698-8747
> www.timgartland.com
>
>


This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.