RE: [Harp-L] Amp troubleshooting



Ross,Also, if a fuse looks "a bit fried" it usually is fried. Hope you replaced the fuse too.Good luck,Buck 

> Date: Thu, 8 Aug 2013 17:31:00 +0000
> From: jdeall@xxxxxxxxxxx
> To: pdxharpdog@xxxxxxxxxxx
> Subject: Re: [Harp-L] Amp troubleshooting
> CC: harp-l@xxxxxxxxxx
> 
> I suggest you keep a full set of spare tubes w/ you at all times. I put mine in a small boxe in bubble wrap in the bottom of my amp. 
> 
> 
> Thanks Jerry, 
> 
> ----- Original Message -----
> From: "Ross Macdonald" <pdxharpdog@xxxxxxxxxxx> 
> To: "List harp-l" <harp-l@xxxxxxxxxx> 
> Sent: Thursday, August 8, 2013 10:24:55 AM 
> Subject: Re: [Harp-L] Amp troubleshooting 
> 
> Thanks to all who helped. Turned out to be the rectifier tube. I now have fuses, and a complete set of tubes mounted securely in my amp cabinet. 
> 
> 
> 
> Sent from my iPhone 
> 
> On Aug 6, 2013, at 9:00 PM, Ross Macdonald <pdxharpdog@xxxxxxxxxxx> wrote: 
> 
> > Hey list, I have a harpgear 30 amp that quit mid tune at a gig last weekend. No buzz, no hum just nothing. It wasn't the power supply from the venue. Took it home and tried the next day to plug it in and turn it on. The power indicator light came on very briefly and then went off. Took a look at the fuse and the fuse looks a bit fried but intact. 
> > 
> > Any ideas, I am not good with tube electronics and have a heavy gigging schedule coming up. Have sent Brian an email to ask his opinion on course of action, but hoping its simple like the fuse because I only gig through this amp. 
> > 
> > Thanks in advance for any help or advice. 
> > 
> > Ross MacDonald 
> > 
> > Sent from my iPad 
> 
 		 	   		  


This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.