[Harp-L] Hohner 365 - using screws
- To: harp-l@xxxxxxxxxx
- Subject: [Harp-L] Hohner 365 - using screws
- From: Mike Fugazzi <mikefugazzi@xxxxxxxxx>
- Date: Tue, 1 Mar 2011 08:49:08 -0600
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:from:date:message-id:subject:to :content-type; bh=faAajsvEmsETCv7kNAqlenfCgfpXbkQAU8ZUJHxyIrA=; b=xZ65vRTi20I7DR7B+jffGOSj3hLs7DUWNOO3eSGPrRI8zoBaS+DyUNCdj7QoaDNBKh 0RTXyU145o0NudjT7m0Oq9SrQVa5sFXOwbSTVLamfIundwLAd1Ur8M3L2pp2aAdFEjZW oxUs3AyHsnc1V2Y2ufYRgMkjzWDiIdV7DQte0=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:from:date:message-id:subject:to:content-type; b=DH5rUqgCnkwRq7O6avPtwPINhwy7+uyYxDX0mB27m1fZJpKKtipAPpBJGEhfg1+cAC YUtgW2PH4r5NqDrKdh5rcmSn33Um+tlWwAgd9BS7Z8e6BqyB3vwucHLMfFV70ijY1GKO 9ifTDTmNH1tIJlhT9g+jhcjEMeXLopGIgl7GQ=
I picked up a 365 from a friend. It has been very gently used, but before I
play it, I want to clean it, etc. While I have it apart, I might as well
thread it for screws and ditch the nails. Any advice on how many/where to
put the screws?
I will sand and seal the stock comb rather than replace it. I will probably
never use the harp live, but it will get a fair amount of work around the
house. I won't have time to fully customize it any time soon, but thought
the conversion to screws was a sound decision.
Thanks!
----------
Mike Fugazzi
vocals/harmonica
http://www.mikefugazzi.com
Facebook <http://www.facebook.com/MikeFugazziMusic>
Quicksilver Custom Harmonicas
<http://www.mikefugazzi.com/fr_customharmonicas.cfm>
This archive was generated by a fusion of
Pipermail 0.09 (Mailman edition) and
MHonArc 2.6.8.