RE: [Harp-L] Over-blows



I agree with you Rick.
I know a lot of people recommend to put more strength in the airflow. I
would personally recommend the contrary : no more stress on the reed, and
the exact same position as the opposite bent note.

Regards,

Jerome
www.youtube.com/JersiMuse

-----Message d'origine-----
De : harp-l-bounces@xxxxxxxxxx [mailto:harp-l-bounces@xxxxxxxxxx] De la part
de Rick Dempster
Envoyé : vendredi 17 juin 2011 04:53
À : jeffery.degregorio@xxxxxxxxxxxxxxxxxx
Cc : harp-l@xxxxxxxxxx
Objet : RE: [Harp-L] Over-blows

No. Just make horrible noises! Like I say, it's no different from a normal
bend, except that you go straight to the fully band note, so that it 'pops'
rather than gently sliding. No more stress om the reed than usual.
RD

>>> "Degregorio, Jeffery" <jeffery.degregorio@xxxxxxxxxxxxxxxxxx> 
>>> 16/06/11 11:07 PM >>>
Thanks Rick for the information.  I appreciate it.  I can blow bend holes
8-10 but at times find myself adjusting the tone after starting the note but
am able to attain the desired semitone.  Do people "break"
reads in an attempt to learn to overblow?  

Jeff 

-----Original Message-----
From: Rick Dempster [mailto:rick.dempster@xxxxxxxxxxx]
Sent: Wednesday, June 15, 2011 9:11 PM
To: Degregorio, Jeffery
Cc: harp-l@xxxxxxxxxx
Subject: Re: [Harp-L] Over-blows

Can you blow bend holes 8-10, Jeff? If so start by applying the same
technique to hole 6, then holes 4 &, 5. (5 is the most difficult, for
me)
Holes 1,2 & 3 might need a bit of adjustment to 'overbend'. (2 & 3 are
duplicate notes, but 1 OB is unobtainable elsewhere except as an OB on 4 and
a a blow bend on 8) You get exactly the same notes on 4,5,6 by blow bending
them as you get on holes 8, 9 & 10, with the exception that you don't get
the half bend that you get on 10. You are doing exactly the same thing;
playing the opposite reed; blowing the draw reed, which plays at a semitone
higher than it's drawn pitch. The big difference is that you can't go to it
gradually, as the lower pitched reed that is its pair is not in sympathy
with it. I teach people to try to blow or draw air through the harp without
making any sound. This is the point at which you are going to play the
opposite reed; when the natural reed has been bent to its limit, and the
opposite reed takes over. 'Overblows' and 'bends' are the same thing; one's
a little trickier than the other.
Good luck!
RD

>>> "Degregorio, Jeffery" <jeffery.degregorio@xxxxxxxxxxxxxxxxxx>
16/06/11 12:09 AM >>>
Hello all:

 

It's been playing and performing "harp" for two years now and TRULY enjoying
it.  I can do a lot with it (bending, riffs, improvising, slides, etc. -
though still learning so much)... but feel I'd like to do more.  Does anyone
have good information, instruction, online video, or anything relating on
where to get started on how to "over-blow" (I guess this is considered a
type of bend)?  I'm not even sure where to get started on this and would
appreciate any ideas and help in this area.  I guess it would be considered
"Over-blowing 101".  Thanks in advance.  

 

Jeff DeGregorio

 



CONFIDENTIALITY NOTICE:   Confidential information, such as identifiable
patient health information or business information, is subject to
protection under state and federal law.    If you are not the intended
recipient of this message, you may not disclose, print, copy or disseminate
this information.  If you have received this in error, please reply and
notify the sender (only) and delete the message.
Unauthorized interception of this e-mail is a violation of federal criminal
law. 



CONFIDENTIALITY NOTICE:   Confidential information, such as identifiable
patient health information or business information, is subject to protection
under state and federal law.    If you are not the intended recipient of
this message, you may not disclose, print, copy or disseminate this
information.  If you have received this in error, please reply and notify
the sender (only) and delete the message.  Unauthorized interception of this
e-mail is a violation of federal criminal law. 






This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.