Re: [Harp-L] shure 545 unidyne III



simple......open up the connector and look for the little black plug with 2
wires attached.  Gently unplug it and turn it 180% and plug it right back
in.  The white wire shoud be the HiZ lead.  Enjoy the new found explosive
output!!!!!

On 8/24/08, John Hegedus <johnhegedus@xxxxxxx> wrote:
>
> How do I change from low impedance to high impedance on this mic?( shure
> 545 unidyne III ) Any info will help....... Thanks
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org
> Harp-L@xxxxxxxxxx
> http://harp-l.org/mailman/listinfo/harp-l
>



-- 
steve
www.thunderharpmics.com
fattest tone on earth!



This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.