[Harp-L] Re: Shure 545S pistol grip mic question



>Is there an adapter that will connect to the 4 hole base
>connector of the mic and has a threaded post at the other end so that I
>can screw-on one of my  Switchcraft 332A connectors (with a 1/4" female
>end) onto it?
David,
I've never seen an adapter like that, but I do have adapaters for the 545
that go from the 4-pin to 1/4" female ...
Screws onto the mic and you just plug your guitar cord into it. Hardwired
for High-Z output.

I have similar adapters available for 3-pin mics. Contact offlist or through
ebay.
-Wendell




This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.